|
Post by Northern Exploration on May 22, 2007 4:33:35 GMT -8
Real minor point but is the time on the blog supposed to be Pacific Standard Time. I just posted at 8:29am in Toronto and the blog reads 4:29. Should be 5:29. Maybe it didn't switch for daylight savings time.
|
|
|
Post by Low Light Mike on May 22, 2007 6:17:09 GMT -8
We've posted about this before...I just don't know where.
I think there's a spot on your "PROFILE" page, where you can choose "observes daylight savings" or not. I think that does the trick.
|
|
|
Post by Northern Exploration on May 22, 2007 6:53:18 GMT -8
Thanks must have missed it before.
|
|
|
Post by Coastal Canuck on May 22, 2007 15:03:59 GMT -8
I have been having the same problem and I checked the profile page and it was set on Pacific time but the time is still wrong
|
|
|
Post by Political Incorrectness on May 22, 2007 16:58:52 GMT -8
There is a setting about DST, which you can manually override to say if it is DST or not.
|
|
|
Post by Retrovision on Sept 19, 2007 8:34:14 GMT -8
No biggie, and I personally don't even think it needs to be addressed as it's so minute, but apparently the forum clock is 2 or 3 minutes slow. Again, I'm not splitting hairs, just mentioning, seems odd for ProBoards if it's on their end.
|
|
|
Post by Balfour on Sept 21, 2007 11:54:20 GMT -8
Clock issues are always a ProBoards issue.
|
|
|
Post by Low Light Mike on Nov 4, 2007 15:32:10 GMT -8
For those who's forum-clock is now 1 hour different from your other clocks:
- go to your profile, and select "modify profile".
- find the timezone part, near the bottom. Go to "observing DST", and say "NO".
This should align your forum clock to your other clocks.....
|
|
|
Post by Canucks on Apr 11, 2008 20:48:53 GMT -8
This is no big deal but the clock for guests is set 2 hours ahead.
|
|